|
Berkeley International is a
specialist in sourcing products worldwide. |
|
Our specialist for bitumen
John
Eyton |
|
| |
|
We work with
manufacturers and very specialised trading companies. |
|
Some of the senior
managers are main speakers at Bitumen conferences. |
|
|
|
There are many different
grades of bitumen and you can see the specifications
below. Most requests are for 60/70 and 80/100 and 85/100
There are several different packing types.
- used drums
- refurbished drums
- new drums
- bitupacks
- specialist bitumen tankers
Please look at the specifications below. If you have
a request, please use the form at the bottom. Copy and
send the request by email to John Eyton |
|
|
|
|
BITUMEN 30/40 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
º C |
1.01-1.06 |
ASTM D-70 |
|
Penetration @ 25 |
º C |
30-40 |
ASTM D-5 |
|
Softening Point |
º C |
55-63 |
ASTM D-36 |
|
Ductility @ 25 |
º C |
100 min |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.2 max |
ASTM D-6 |
|
Drop In Penetration After Heating % |
--- |
20 max |
ASTM D-6 & D-5 |
|
Flash Point |
º C |
250 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99.5 min |
ASTM D-4 |
|
Organic Matter Insoluble In CS2 |
%wt |
|
ASTM D-4 |
|
Spot Test |
º C |
negative |
* A.A.S.H.O.T.102 |
|
* American Association of State Highway Officials |
|
BITUMEN 40/50 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.01-1.06 |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
40-50 |
ASTM D-5 |
|
Softening Point |
ºC |
52-60 |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
100 |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.2 max |
ASTM D-6 |
|
Drop In Penetration After Heating % |
--- |
20 max |
ASTM D-6 & D-5 |
|
Flash Point |
ºC |
250 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99.5 min |
ASTM D-4 |
|
Spot Test |
ºC |
negative |
* A.A.S.H.O.T.102 |
|
* American Association of State Highway Officials |
|
BITUMEN 50/70 |
|
Characteristic |
Unit |
value |
Test Method |
|
Penetration @ 25 |
ºC |
50-70 |
EN 1426 |
|
Softening Point |
ºC |
46-54 |
EN 1427 |
|
Resistance to Hardening @ 163 ºC
Retained Penetration %
Change of Mass % |
ºC
%wt
%wt |
50 min
0.5 max |
EN 12607-1 |
|
Flash Point |
ºC |
230 min |
EN ISO 2592 |
|
Solubility % |
%wt |
99.0 min |
EN 12592 |
|
Penetration Index |
|
-1.5 to +0.7 |
EN 12593-Annex A |
|
Fraass Breaking Point |
ºC |
-8 max |
EN 12593 |
|
Kinematic Viscosity @ 135 ºC |
º C mm²/s |
295 min |
EN 12595 |
|
* American Association of State Highway Officials |
|
|
|
|
|
|
|
|
|
BITUMEN 60/70 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.01-1.06 |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
60-70 |
ASTM D-5 |
|
Softening Point |
ºC |
49-56 |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
100 min |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.2 max |
ASTM D-6 |
|
Drop In Penetration After Heating % |
--- |
20 max |
ASTM D-6 & D-5 |
|
Flash Point |
ºC |
250 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99.5 min |
ASTM D-4 |
|
Spot Test |
ºC |
negative |
* A.A.S.H.O.T.102 |
|
* American Association of State Highway Officials |
|
BITUMEN 80/100 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.00-1.05 |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
80-100 |
ASTM D-5 |
|
Softening Point |
ºC |
43 min |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
100 min |
ASTM D-113 |
|
Flash Point |
ºC |
225 min |
ASTM D-92 |
|
Solubility in Trichloroethylene |
%wt |
99 min |
ASTM D-4 |
|
Loss on Heating |
%wt |
0.5 max |
ASTM D-6 |
|
Drop In Penetration After Heating % |
%wt |
20 max |
ASTM D-6 & D-5 |
|
Penetration Index |
--- |
-0.8 to +0.7 |
--- |
|
Spot Test |
ºC |
negative |
* A.A.S.H.O.T.102 |
|
* American Association of State Highway Officials |
|
BITUMEN 85/100 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.01-1.05 |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
85-100 |
ASTM D-5 |
|
Softening Point |
ºC |
45-52 |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
100 min |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.5 max |
ASTM D-6 |
|
Drop In Penetration After Heating % |
--- |
20 max |
ASTM D-6 & D-5 |
|
Flash Point |
ºC |
250 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99.5 min |
ASTM D-4 |
|
Organic Matter Insoluble In CS2 |
%wt |
0.2 max |
ASTM D-4 |
|
Spot Test |
ºC |
negative |
* A.A.S.H.O.T.102 |
|
* American Association of State Highway Officials |
| |
|
|
|
|
|
|
|
BITUMEN 100/120 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.01-1.04 |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
100-120 |
ASTM D-5 |
|
Softening Point |
ºC |
42-49 |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
100 min |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.2 max |
ASTM D-6 |
|
Drop In Penetration After Heating % |
--- |
20 max |
ASTM D-6 & D-5 |
|
Flash Point |
ºC |
250 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99.5 min |
ASTM D-4 |
|
Organic Matter Insoluble In CS2 |
%wt |
0.2 max |
ASTM D-4 |
|
Spot Test |
ºC |
negative |
* A.A.S.H.O.T.102 |
|
* American Association of State Highway Officials |
|
BITUMEN R 90/15 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.05 approx |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
10-20 |
ASTM D-5 |
|
Softening Point |
ºC |
85-95 |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
1.5 min |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.2 max |
ASTM D-6 |
|
Flash Point |
ºC |
225 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99 min |
ASTM D-4 |
|
* American Association of State Highway Officials |
|
BITUMEN R 85/25 |
|
Characteristic |
Unit |
value |
Test Method |
|
Specific Gravity @ 25/25 |
ºC |
1.05 approx |
ASTM D-70 |
|
Penetration @ 25 ºC |
ºC |
20-30 |
ASTM D-5 |
|
Softening Point |
ºC |
80-90 |
ASTM D-36 |
|
Ductility @ 25 ºC |
ºC |
3 min |
ASTM D-113 |
|
Loss On Heating |
%wt |
0.2 max |
ASTM D-6 |
|
Flash Point |
ºC |
225 min |
ASTM D-92 |
|
Solubility In CS2 |
%wt |
99 min |
ASTM D-4 |
|
* American Association of State Highway Officials |
|
BITUMEN R VG 30 |
|
Characteristic |
Unit |
value |
Test Method |
|
Absolute Viscosity @ 60 |
ºC |
2400 min |
ASTM D-2171 |
|
Kinematic Viscosity @ 135 ºC |
ºC |
350 min |
ASTM D-2170 |
|
Penetration @ 25 ºC |
ºC |
50-70 |
ASTM D-5 |
|
Softening Point |
ºC |
47 min |
ASTM D-36 |
|
Solubility In trichloroethylene |
%wt |
99 min |
ASTM D-2040 |
|
Ductility @ 25 ºC after RTFOT |
ºC |
40 min |
ASTM D-113 |
|
Flash Point |
%wt |
220 min |
ASTM D-92 |
|
* American Association of State Highway Officials |
|
Characteristic |
Unit |
value |
Test Method |
|
Kin.Vis @ 60 |
cst |
60-30 |
ASTM D-2170 |
|
Flash Point |
C |
38 min |
ASTM D-3143 |
|
Water Content |
%vol |
0.2 max |
ASTM D-95 |
|
Distillate To 360 |
%vol |
|
ASTM D-402 |
|
225 |
|
25 max |
|
260 |
|
70-40 |
|
315 |
|
93-75 |
|
Residue From Distillation To 360 |
|
50 min |
ASTM D-402 |
|
Test on Residue Bitumen from Distillation : |
|
Penetration @ 25 |
C |
250-120 |
ASTM D-5 |
|
Ductility |
C |
100 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
%wt |
99 min |
ASTM D-2042 |
| |
|
BITUMEN MC-70 |
|
Characteristic |
Unit |
value |
Test Method |
|
Kin.Vis @ 60 |
cst |
140-70 |
ASTM D-2170 |
|
Flash Point |
C |
38 min |
ASTM D-3143 |
|
Water Content |
%vol |
0.2 max |
ASTM D-95 |
|
Distillate To 360 |
%vol |
|
ASTM D-402 |
|
225 |
|
20 max |
|
260 |
|
60-20 |
|
315 |
|
90-65 |
|
Residue From Distillation To 360 |
|
55 min |
ASTM D-402 |
|
Test on Residue Bitumen from Distillation : |
|
Penetration @ 25 |
C |
250-120 |
ASTM D-5 |
|
Ductility |
C |
100 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
%wt |
99 min |
ASTM D-2042 |
| |
|
|
|
|
|
|
|
|
|
|
BITUMEN MC-250 |
|
Characteristic |
Unit |
value |
Test Method |
|
Kin.Vis @ 60 |
cst |
500-250 |
ASTM D-2170 |
|
Flash Point |
C |
66 min |
ASTM D-3143 |
|
Water Content |
%vol |
0.2 max |
ASTM D-95 |
|
Distillate To 360 |
%vol |
|
ASTM D-402 |
|
225 |
|
10 max |
|
260 |
|
55-15 |
|
315 |
|
87-60 |
|
Residue From Distillation To 360 |
|
67 min |
ASTM D-402 |
|
Test on Residue Bitumen from Distillation : |
|
Penetration @ 25 |
C |
250-120 |
ASTM D-5 |
|
Ductility |
C |
100 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
%wt |
99 min |
ASTM D-2042 |
|
BITUMEN MC-800 |
|
Characteristic |
Unit |
value |
Test Method |
|
Kin.Vis @ 60 |
cst |
1600-800 |
ASTM D-2170 |
|
Flash Point |
C |
66 min |
ASTM D-3143 |
|
Water Content |
%vol |
0.2 max |
ASTM D-95 |
|
Distillate To 360 |
%vol |
|
ASTM D-402 |
|
225 |
|
--- |
|
260 |
|
35-0 |
|
315 |
|
80-45 |
|
Residue From Distillation To 360 |
|
75 min |
ASTM D-402 |
|
Test on Residue Bitumen from Distillation : |
|
Penetration @ 25 |
C |
250-120 |
ASTM D-5 |
|
Ductility |
C |
100 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
%wt |
99 min |
ASTM D-2042 |
|
BITUMEN MC-3000 |
|
Characteristic |
Unit |
value |
Test Method |
|
Kin.Vis @ 60 |
cst |
6000-3000 |
ASTM D-2170 |
|
Flash Point |
C |
66 min |
ASTM D-3143 |
|
Water Content |
%vol |
0.2 max |
ASTM D-95 |
|
Distillate To 360 |
%vol |
|
ASTM D-402 |
|
225 |
|
--- |
|
260 |
|
15-0 |
|
315 |
|
75-15 |
|
Residue From Distillation To 360 |
|
80 min |
ASTM D-402 |
|
Test on Residue Bitumen from Distillation : |
|
Penetration @ 25 |
C |
250-120 |
ASTM D-5 |
|
Ductility |
C |
100 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
%wt |
99 min |
ASTM D-2042 |
|
Cationic Rapid Setting BITUMEN EMULSION (C.R.S) |
|
Characteristic |
value |
Test Method |
|
Surface Charge |
positive |
ASTM D-244 |
|
Bitumen Percentage |
55% |
ASTM D-244 |
|
Storage Stability , 24h |
1% max |
ASTM D-244 |
|
Sieve Test |
0.1% max |
ASTM D-244 |
|
Penetration @ 25 |
100 min |
ASTM D-5 |
|
Ductility |
40 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
97.5% min |
ASTM D-4 |
|
Cationic Rapid Setting BITUMEN EMULSION (C.R.S) |
|
Characteristic |
value |
Test Method |
|
Surface Charge |
positive |
ASTM D-244 |
|
Bitumen Percentage |
60% |
ASTM D-244 |
|
Storage Stability , 24h |
1% max |
ASTM D-244 |
|
Sieve Test |
0.1% max |
ASTM D-244 |
|
Penetration @ 25 |
100 min |
ASTM D-5 |
|
Ductility |
40 min |
ASTM D-113 |
|
Solubility In Trichloroethylene |
97.5% min |
ASTM D-4 |
|
|
|
|
|
Bitumen
request format |
|
|
|
|
|
product |
bitumen |
|
grade |
?? |
|
preferred
origin |
|
|
are theer
any origins which you will not consider? |
?? |
|
amount in
total |
??
metric tons |
|
number of
shipments |
?? |
|
preferred
packing |
?? |
|
delivery
port and country |
?? |
|
is your
company the end buyer |
?? |
|
|
|
